Industrial connectivity solutions
New terminal with special connections, 1.5 mm²
VPC.2/S Terminal block for female connectors pitch 5.08 mm
with aligned outputs.
December 19, 2024
No Comments
€358.00 + VAT
In stock
In stock
DC/DC converter IN: 12 Vdc / OUT: 24 Vdc 5 A
| Code | XCSA120BC |
|---|---|
| Type | CSA120BC |
| HS code | 85044083 |
| INPUT TECHNICAL DATA | |
| Input rated voltage | 12 Vdc |
| Input voltage DC | 10.5…18 Vdc |
| Current consumption | 10 A (12 Vdc) ±10% |
| Inrush peak current | 60 A |
| Internal protection fuse | T 20 A |
| External protection on AC line | MT: C-25 A / Fuse: T-25 A |
| OUTPUT TECHNICAL DATA | |
| Output voltage range | 24 Vdc |
| Output adjustable range | 22.5…27.5 Vdc |
| Continuous current | 5 A (24 Vdc) |
| Overload limiting | 6.5 A |
| Short circuit peak current | 12 A for 300 ms |
| Ripple @ nominal ratings | 100 mVpp |
| Hold up time | 1 ms |
| Status indication | LED "DC OK" |
| Parallel connection | possible |
| Redundant parallel connection | possible with external ORing diode |
| GENERAL TECHNICAL DATA | |
| Efficiency | 83% (12 Vdc) |
| Dissipated power | 25 W (12 Vdc) |
| Operating temperature range | –20…+50°C |
| Input / output isolation | 2.1 kVdc / 60s |
| Input / ground isolation | 1.41 kVdc / 60s |
| Output / ground isolation | 0.75 kVdc / 60s |
| Standard / approvals | EN 60950-1 |
| EMC Standard | EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4 |
| Overvoltage category / pollution degree | II / 2 |
| Protection degree | IP 20 |
| Connection terminal | 2.5 mm² / 2.5 mm² |
| Housing material | aluminium |
| Dimensions (LxHxD) | 40x130x115 mm |
| Approximate weight | 550 g |
| Mounting information | vertical on a rail, 10 mm from adjacent components |
| Alarm contact | no |
| ACCESSORIES | |
| Mounting rail (IEC60715/TH35-7.5) | PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB |
| Mounting rail (IEC60715/TH35-15) | PR/3/PP, PR/3/PP/ZB, PR/3/PA, PR/3/PA/ZB |
| APPROVALS AND MARKINGS |   |
For further information see PDF catalog
VPC.2/S Terminal block for female connectors pitch 5.08 mm
with aligned outputs.
The new CSE3 range is part of the Easy Power series, which includes industrial power supplies designed for standard applications with an excellent price/performance ratio.
Copyright © Cabur srl Sede legale Località isola Grande, 45 – 17041 Altare (SV) – Italia – Tel. 019-589991 – Fax 019-58999233 – E-mail: info@cabur.it
Cap. Sociale: €2.000.000 Int. versato – Reg. Soc. Trib. Savona N° 4635 – C.C.I.A.A. N° 27269- Export N° SV 000532 – Iscrizione al Registro AEE n. IT18050000010376 – P.IVA e Cod. Fisc.: 00100760099
DISCLAIMER Cabur Srl may change and update any document available online without any obligation to inform users. Only cabur.it and cabur.eu domains are registered and maintained by Cabur srl. Cabur has no responsibility for contents published on sites under the same name, with different extensions from .it and .eu
for technical support
+39 019 58999.219 customercare@cabur.it
for commercial support
+39 019 58999.609 vendite@cabur.it
from monday to friday 8:30-12:30 13:00-17:00