€603.00 + VAT
In stock
In stock
Single phase power supply IN: 120–230 Vac / OUT: 24 Vdc 20 A
| Series | Easy Power |
|---|---|
| Code | XCSL1480W024VAB |
| Type | CSL1-480W/024V/AB (3) |
| HS code | 85044083 |
| INPUT TECHNICAL DATA | |
| Input rated voltage | 120–230 Vac |
| Input voltage AC | 85…264 Vac |
| Input voltage DC | 100…370 Vdc (derating Uin |
| Frequency | 47…63 Hz |
| Current consumption | 4.9 A (120 Vac) / 2.4 A (230 Vac) |
| Inrush peak current | 36 A |
| Power factor | > 0.99 |
| Internal protection fuse | Yes 8 A |
| External protection on AC line | MT: C-6 A / Fuse: T-6.3 A |
| OUTPUT TECHNICAL DATA | |
| Output voltage range | 24 Vdc ±1% |
| Output adjustable range | 20…28.5 Vdc |
| Continuous current | 20 A at 50°C |
| Overload limiting | 23 A (max. 25 A constant current) |
| Short circuit peak current | 32 A 300 ms On /800 ms Off (HICCUP mode) |
| Ripple @ nominal ratings | 200 mVpp |
| Hold up time | 18 ms (120 Vac) / 18 ms (230 Vac) |
| Status indication | LED "DC OK", LED "Stand-by" |
| Alarm contact | dry contact, max. 1A |
| Parallel connection | possible |
| Redundant parallel connection | possible with external ORing diode |
| GENERAL TECHNICAL DATA | |
| Efficiency | 90.7 % |
| Dissipated power | 53 W |
| Operating temperature range | –20…+70°C (derating -14 W/°C >50°C) |
| Input / output isolation | 3 KVac / 60 s (SELV output) |
| Input / ground isolation | 1.5 kVac / 60 s |
| Output / ground isolation | 0.5 kVac / 60 s |
| Standard / approvals | EN 60950-1 |
| EMC Standard | EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4 |
| Overvoltage category / pollution degree | II / 2 |
| Protection degree | IP 20 |
| Connection terminal | 4 mm² / 4 mm² |
| Housing material | aluminium |
| Dimensions (LxHxD) | 80x170x127 mm |
| Approximate weight | 1.5 kg |
| Mounting information | vertical on a rail, 20 mm from adjacent components |
| ACCESSORIES | |
| Mounting rail (IEC60715/TH35-7.5) | PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB |
| APPROVALS AND MARKINGS |   |
For further information see PDF catalog
A new tutorial dedicated to the Cabur SmartPrint Plus Industrial Marking System is online. The video shows how to activate the Marking Pro XT software.
These include twelve new models, six for the ISA range and six for the ISB range.
The SmartPrint Plus is Cabur’s answer to the many different needs in the world of industrial marking.
Ideal for identifying terminal blocks, cables and electrical components.
Copyright © Cabur srl Sede legale Località isola Grande, 45 – 17041 Altare (SV) – Italia – Tel. 019-589991 – Fax 019-58999233 – E-mail: info@cabur.it
Cap. Sociale: €2.000.000 Int. versato – Reg. Soc. Trib. Savona N° 4635 – C.C.I.A.A. N° 27269- Export N° SV 000532 – Iscrizione al Registro AEE n. IT18050000010376 – P.IVA e Cod. Fisc.: 00100760099
DISCLAIMER Cabur Srl may change and update any document available online without any obligation to inform users. Only cabur.it and cabur.eu domains are registered and maintained by Cabur srl. Cabur has no responsibility for contents published on sites under the same name, with different extensions from .it and .eu
for technical support
+39 019 58999.219 customercare@cabur.it
for commercial support
+39 019 58999.609 vendite@cabur.it
from monday to friday 8:30-12:30 13:00-17:00
